Blastrac 1-16DB4-V2, Руководство по обслуживанию, Страница: 3 / 62

1.
Introduction
It is important that all persons who are working with. or maintaining this machine,
read the manual carefully and understand it fully. Keep this manual near the machine,
to enable it to be referred to at any time. Only authorized personnel may operate this
machine.
2.
Safety
Before operating the machine, the personnel must be familiar with the safety
instructions given in this manual. Keep this manual near to the machine, so it can
always be consulted.
Advice for Operators of Blast Cleaning Machines
Warnings and Symbols
3
In accordance with the accident prevention regulations for blast cleaning
work, the operator must provide operating instructions for blast cleaning
work in a form and language that is understandable.
During operation the acceptable noise level of the 1-16DB4-V2 could
exceed 85dB (A). This noise level depends on the job site. When the noise
level is 85 dB (A) or more, the machine operator and persons working near
the machine must wear sound-insulating equipment. However, it is the
contractor’s responsibility to ensure the safety of their operator.
Engine exhaust gases contain poisonous carbon monoxide. Carbon
monoxide is odorless and colorless and can cause injury or death if inhaled.
Do not use equipment indoors without adequate ventilation. Refer to OSHA
guidelines and regulations concerning maximum levels of exposure to
carbon monoxide gases and other hazards associated with using internal
combustion engines.
Symbol of operational safety:
In these operating instructions, this symbol will be shown next to all safety
precautions that are to be followed to maximize safety and equipment
performance. Follow these instructions and take special care in these
circumstances. In addition to these instructions, the general safety
precautions and accident prevention guidelines are also to be followed.
Information, instructions, and restrictions with regard to possible risks to
persons, property, or equipment.