BLAM
BT45
Wireless stereo speaker
USER MANUAL
Contenu de la boîte
• 45W Wireless speaker
• Audio cable
• Type C USB cable
• EU Adapter
• User Manual
1. Charging indicator
Flashing red: battery is low / solid red: device is charging / solid green:
device is fully charged / no light: power adapter is disconnected.
2. USB indicator
When solid yellow indicator light is on, USB mode is enabled.
3. AUX indicator
When solid green indicator light is on, AUX mode is enabled.
4. Bluetooth indicator
Bluetooth is in pairing mode; blue indicator is flashing. Solid blue for
connection successful. TWS mode is in pairing, green indicator is
flashing; solid green for TWS connection successful.
5. NFC Area
Hold your device over this area to use NFC for Bluetooth Connection.
6. Microphone
Remain within three feet of microphone while speaking.
7. Thermal sensor
Detects the heat of a human hand and will automatically activate the
devices frosted LED button-backlighting.
8. TWS button
Press to enter TWS or quit TWS pairing.
9. Decrease volume
10. Increase volume
11. Play/Pause button
Use to play and pause audio. While in Bluetooth mode, press and hold
to activate Siri or S-Voice. Press again to disable. Incoming call: press
once to answer, press again to end; Press and hold to decline/end call.
12. AUX button
Press to switch from Bluetooth to AUX mode.
13. Bluetooth button
Speaker default mode is set to Bluetooth. Press and hold to enter pairing
mode. To return to AUX/USB mode, press the button again.
14. USB disk button
Press this button to enter USB mode, play the music from USB flash
drive.
15. Power button
Press and hold for three seconds to turn on/off.
Auto Power off after 40 minutes idle for power saving.
TO CHARGE THE SPEAKERS
Insert the provided power cable into the charging port of the device.
Charging begins automatically even if the device is powered off.
1. Charging port:
for use by TYPE-C (DC5V/2A).
2. AUX IN Port:
connect speaker to external media devices.
3. USB port - USB disk play:
provides power to connected devices
(5V/1A output).
4. Reset button:
used to rest device should be operational issue
occur.
TRUE WIRELESS STEREO SOUND (TWS)
Connect two speakers in stereo
Once one of your two speakers are successfully paired with a device,
following these steps to pair TWS:
• Press TWS button
8
on the first speaker to enter pairing with
green indication fishing and pairing prompts.
• Power on the 2nd speaker to pairing (disconnected if Bluetooth
connected).
• A tone will sound when the two speakers have been success-
fully paired with solid green Bluetooth indicator on both spea-
kers.
• Now you can enjoy the crisp stereo surround sound with sepa-
rate left and right channel. The next time when speakers are
powered on, they need to be re-paired.
Now you can enjoy the crisp stereo surround sound with separate left
and right channel. The next time when speakers are powered on, they
need to be re-paired.
NOTE
- TWS Function available only in Bluetooth & AUX mode (USB mode
exception).
- There is no memory function for TWS connections.
The two speakers shut down simultaneously while power off.
Follow the above instructions to pair two speakers the next time. It’s
better to have no music playing while TWS pairing.
Bluetooth
1. Power on speaker and hold your phone or other device within 3 feet
of the speaker, press and hold the Bluetooth button
13
for 3 seconds,
the system will then enter pairing mode and the indicator light should
begin flashing.
2. Pairing mode will automatically be canceled (signaled by a beep) after
3 minutes. To re-enter pairing mode, follow instructions beginning at
step 1.
3. Ensure Bluetooth is enabled on the device you wish to pair the
speaker with.
4. The speaker will appear as “BT45” when scanning for available
devices.
5. When selecting “BT45” from the list if prompted for a password
(sometimes called a “Passkey”, “PIN number”), enter “0000”.
6. The speaker will record this device as the last device paired.
7. When in Bluetooth mode you can switch to “AUX mode” by inserting
the AUX cable or by pressing the AUX button
12
.
8. Incoming calls will override music and other media with an incoming
call voice prompt, simply press the Play button
11
to answer or press
and hold to decline/end the call. Press the Play button
11
to answer
a second incoming call.
9. Press and hold the Play button
11
for three seconds to activate
Siri/S-Voice of your phone.
AUX
Insert the AUX cord into the designated port to automatically with
the speaker to AUX mode. When in AUX mode, AUX indicator is solid
green. Connect your audio device to the AUX input with the supplied
3.5mm audio cable.
NFC
Turn on the NFC function on the device you wish to connect to your
speaker. Touch the device to the speaker NFC area located on the
top of the speaker next to the Mic. Port. The speaker will connect
automatically.
CAUTION
Proper use
1. To prevent damage and risk of electrical shock, do not expose this
device to dust, vibration, rain, water or liquids of any kind.
2. Do not place device near open flames or extreme heat sources.
Always place your device on level, flat and stable surfaces.
3. Avoid placing items on top of the speaker.
4. Do not use excessive force when pressing buttons or handling
speaker.
5. To clean your speakers, use a dry, soft cloth or minimally damp cloth
without any corrosive solvent or cleaning agent.
SAFETY
To prevent fire, shock or injury, please do not disassemble or replace
any parts of this speaker. If your device becomes damaged or in need
of repair, please contact a professional maintenance or qualified
service center for assistance. We are not responsible for any personal
injury or property damage caused by improper use of this product.
Please do not allow the use of this speaker by small children without
proper adult supervision.
Содержание BT45
Страница 2: ......
