BLADEZ INSPIRIT ELLIPTICAL
BLADEZ FITNESS
•
BH North America Corporation
20155 Ellipse
•
Foothill Ranch
•
CA
•
92610
•
www.bladezfitness.com
24
COMPUTER CONSOLE CONTINUED
TELEMETRIC PULSE RATE
(Optional)
The console is equipped to receive signals from a telemetric pulse measurement system. The
system is comprised of a receiver and a transmitter (T) (chest band) Fig 4.
This telemetric pulse rate system takes precedence over the hand-grip pulse rate
system when both are used together.
TEST MEASUREMENTS: FITNESS
This computer console is equipped with a recovery test function. This offers you the advantage
of being able to measure how long it takes your heart rate to recover after having finished the
exercise. After finishing the exercise leave your hands on the pulse sensors (R) and press the
“
Fitness Test
”
button and this will start a one minute countdown. Only the Time and Pulse rate
function read-outs will remain displayed. The computer will measure your pulse rate during this
minute. The heart rate recovery time will be displayed on the Heart rate line. If, at any time
during this minute, you decide to abandon this test then press the
“
Test
”
button and this will
take you back to the main screen. When the minute is up, the computer will work out the
difference and your fitness rating will be displayed up on the screen:
“
F1, F2,..., F5, F16; where
F1 is the best (fitness
“
Excellent
”
) and F6 the worst (fitness
“
Very Poor
”
). Pressing the TEST
button will take you back to the main screen, where the functions will be in the same mode as
when the TEST began.
The comparison between the worked heart rate and the recovery heart rate provides a fast,
simple method of gauging how fit you are. Your fitness rating is a guideline that shows you how
fast your heart recovers after physical exertion. If you exercise regularly then you will see your
fitness rating improve. The test will not work if the sensor is not connected correctly or if the
error code
“
E1
”
appears on the screen. The TEST will not work if you do not have both hands
placed on the hand-grip sensors (R) Fig. 3 after you have stopped doing the exercise. If the
error code
“
E1
”
is shown on the screen then this means that you do not have your hands
positioned correctly on the hand-grip sensors (R). If the error code
“
E2
”
appears on the screen,
this means that you have not stopped exercising.
ATTACHING THE COMPUTER CONSOLE
CONNECTING THE HAND-GRIP CABLE
(Pulse sensors)
Take cable (41a-42a) coming out of the handlebar stem and connect it to cable (41-42) coming
out of the console, Fig 5.
CONNECTING THE MAIN CABLE
Connect the terminal block (34) coming out of the console, Fig 5, to the terminal block (40)
coming out of the handlebar stem. Remove the screws (15) from the base of the console and
place the console on top of the handlebar (17), making sure not to catch any of the cables, and
attach it by using the screws removed previously.
