GETTING STARTED
WARNING:
Before using this product, read this manual for important safety
and health information.
Required Items:
- A compatible device such as a cellular phone, camera, or electronic accessory
- A micro-USB cable for recharging PulsePak
Attaching PulsePak to Your Phone:
Insert PulsePak’s Power Output Plug into your phone’s charging port. PulsePak
will automatically begin charging your phone. Gently press the Retractable
Switch and slide the switch backward to retract the Power Output Plug for safe
storage. Recharge PulsePak’s internal battery by connecting a micro USB cable
to the Micro USB Power Input.
Note: For optimal results, exit all apps running in the background and turn off
power draining features such as GPS, Bluetooth, Wifi, etc.
LED Indicators:
Red Light - PulsePak’s internal battery is recharging.
Green Light - PulsePak’s internal battery has been fully charged.
CLEANING
Before cleaning, disconnect all cables and remove PulsePak from any external
devices.
• Use a soft, lint-free cloth.
• Avoid getting moisture in openings.
• Don’t use cleaning products
IMPORTANT HEALTH AND SAFETY WARNINGS
WARNING: Failure to follow these safety instructions could result in fire,
electric shock, or other injuries, or damage to your phone or other property.
Read all safety information below before using PulsePak.
CHOKING HAZARD: Contains small parts. Not for Children under 3 years.
May contain sharp edges.
Operational Temperature Warning:
PulsePak is designed to operate and be stored in ambient temperatures
between 32° and 95° F (0° and 35° C). Do not expose PulsePak to extreme
temperatures, including heat caused by intense sunlight; it can be damaged
and battery life shortened if stored or operated outside of these temperatures.
Avoid exposing PulsePak to dramatic changes in temperature or humidity. If the
temperature of PulsePak exceeds normal operating temperatures, it may not
function properly and may result in permanent damage. If PulsePak or your
mobile device is excessively hot, is emitting odor, is deformed, abraded, cut, or
is experiencing or demonstrating an abnormal phenomenon stop using the
affected device(s) immediately and contact the manufacturer. This product
contains chemicals that are known to the state of California to cause cancer
and birth defects or other reproductive harm.
PROPER CARE FOR YOUR PRODUCT
Be sure that PulsePak is securely connected to your device during use. If
PulsePak is not securely connected, it could result in damage to your phone.
Blade Electronics assumes no responsibility for any damage caused to devices
used with PulsePak.
PulsePak has an internal, lithium-ion rechargeable battery. Rechargeable
batteries have a limited number of charge cycles and may eventually need to
be replaced and disposed of.
PulsePak has sensitive electronic components inside and should be handled
with care. PulsePak can be damaged if dropped, burned, punctured, crushed,
or if it comes in contact with liquid. Don’t use a damaged PulsePak, as it may
cause injury.
Never force a connector into a port or apply excessive pressure to a button,
because this may cause damage that is not covered under the warranty. Do
not open, take apart, modify, or repair PulsePak in any way. Disassembling
PulsePak may cause injury to you or damage to PulsePak and it will void your
warranty. Don’t attempt to replace the PulsePak battery yourself—you may
damage the battery, which could cause overheating and injury. Do not
incinerate the battery.
If this battery is intended to be used by a minor, the purchasing adult agrees to
provide detailed instructions and warnings to any minor prior to use. Failure to
do so is sole responsibility of the purchaser, who agrees to indemnify Blade
Electronics for any unintended use/misuse by a minor.
DISPOSAL AND RECYCLING
You must dispose of PulsePak properly according to local laws and regulations.
PulsePak contains electronic components and a battery and, therefore, must be
disposed of separately from household waste. Contact local authorities to
learn about disposal and recycling options.
WARRANTY INFORMATION
PulsePak has a one year limited warranty. For detailed information, visit
www.Blade-Electronics.com/warranty
BLADE ELECTRONICS SUPPORT
Comprehensive support information is available online at www.Blade-Electron
-
ics.com/contact
© 2014 Blade Electronics LLC. All rights reserved. PulsePak and the Saw Blade
logo are registered trademarks of Blade Electronics LLC. All other logos and
trademarks are property of their respective owners. Patents Pending. Mention
of third-party products is for informational purposes only. Blade Electronics
assumes no responsibility in regard to the performance or use of these
products. All agreements or warranties, if any, take place directly between the
vendors and the prospective users. Every effort has been made to ensure that
the information in this manual is accurate. Blade Electronics is not responsible
for printing or clerical errors.
2.0/2014-12
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. NOTE: This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna. —Increase the separation
between the equipment and receiver.—Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. —Consult
the dealer or an experienced radio/TV technician for help.
User Guide
TOP
BOTTOM
Power Output Plug
(micro USB for Android or
Lightning for iPhone)
LED Indicator
Key Ring Hole
Retractable Switch for
Power Output Plug
Micro USB Power Input
