RackSwitch G8124 Installation Guide
BPP-00018-01, December 2009
Chapter 2: Installing the RackSwitch G8124
33
The switch performs initial self tests, and displays the
Password:
prompt,
similar to the following screen:
At the
Password:
prompt, enter the switch password, and press
<Enter>
.
The default password is
admin
Default Configuration
The switch software contains default configuration files that are loaded at the factory.
The default configuration is part of the software; it cannot be deleted or changed.
The default settings allow the switch to perform basic functions with minimal effort by the
system administrator.
Memory Test ................................
Production Mode
PPCBoot 0.0.0.10 (new flash)
Memory Test (0x00) .............................PASSED
...
Blade Network Technologies RS 8124
Jan 1 00:01:27 2008:
NOTICE-5:Interface Oper Status Indication - Port 7 State UP
Password:
