manualshive.com logo in svg

BLADDERSCAN BVI 3000, Руководство по эксплуатации и техническому обслуживанию, Страница: 33 / 72

Поделиться
Скачать
BLADDERSCAN BVI 3000 Скачать руководство пользователя страница 33

25

Operations & Maintenance Manual: Using the Instrument

SCANNING A PATIENT

Verathon

®

 advises new operators to use the BladderScan BVI 3000 on patients with moderately full bladders, 

rather than initially attempting to locate nearly empty bladders. An in‑service training video has been supplied 

with your instrument. It is recommended that you view the video as a supplement to the procedures provided in 

this manual.

PROCEDURE 1.  MEASURE BLADDER VOLUME

1.  Ensure the instrument has been properly cleaned according to the instructions in the 

Cleaning & Disinfecting

 

chapter on page 38.

2. 

Ensure that the battery is sufficiently charged. If necessary, recharge or replace the battery.

3.  Turn the BladderScan BVI 3000 on by pressing the power   button.

4.  On the Main Menu screen, press the 

SCAN

 button. 

BVI 3000

SCAN

ALT

VERATHON

PRINT

NOTES

13:27

05/22/14

5.  On the Scan screen, press the 

Male/Female

 button in order to select the patient's gender.

The LCD screen shows a male or a female icon to indicate the gender that is selected. Use the female 

option only for women who have not undergone a hysterectomy (the female option allows the instrument 

to exclude the uterus from the measurement, which may resemble the bladder ultrasonically). For all other 

patients, use the Male option.

DONE

SCAN

READY TO SCAN

6.  Have the patient lie in the supine position with abdominal muscles relaxed. 

7.  Palpate the patient’s symphysis pubis (pubic bone). 

Содержание BVI 3000









































































Отзывы:

Нет отзывов