BLACKMER STX1220A, Инструкции по установке, эксплуатации и обслуживанию

Страница: 1 / 12

BLACKMER TRUCK PUMPS
961823
INSTRUCTIONS NO. 203-A00
INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS
MODELS: STX3, STX2A, STX1220A,
STX3-DEF, STX2A-DEF, STX1220A-DEF
Section
Effective
Replaces
203
Mar 2012
May 2011
STX3 STX2A, STX1220A
STX3-DEF STX2A-DEF, STX1220A-DEF
TABLE OF CONTENTS
Page
PUMP DATA
Technical Data .................................................... 2
Initial Pump Start Up Information ........................ 2
INSTALLATION
Pre-Installation Cleaning ..................................... 3
Location and Piping ............................................ 3
Truck Mounting ................................................... 3
Pump Drive ......................................................... 3
Hydraulic Drive ................................................... 4
Pump Rotation .................................................... 4
To Change Pump Rotation ................................. 4
OPERATION
Pre-Start Up Check List ...................................... 4
Start Up Procedures ........................................... 4
Pump Speed ....................................................... 5
Reverse Rotation ................................................ 5
Flushing the Pump .............................................. 5
Pump Relief Valve .............................................. 5
Relief Valve Setting and Adjustment .................. 5
MAINTENANCE
Strainers ............................................................. 6
Lubrication .......................................................... 6
Vane Replacement ............................................. 6
Pump Disassembly ............................................. 7
Pump Assembly .................................................. 7
TROUBLE SHOOTING .....................................
9
NOTE : Numbers in parentheses following individual parts
indicate reference numbers on Blackmer Parts List No.
203-A01, 203-A03 and 203-A04.
Blackmer pump manuals and parts lists may be obtained
from Blackmer’s website (www.blackmer.com) or by
contacting Blackmer Customer Service.
SAFETY DATA
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the product, or in the
manual, look for one of the following signal words and be
alert to the potential for personal injury, death or major
property damage
Warns of hazards that WILL cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause personal injury
or property damage.
NOTICE:
Indicates special instructions which are very
important and must be followed.
NOTICE:
Blackmer Truck Pumps MUST only be installed in systems,
which have been designed by qualified engineering
personnel. The system
MUST conform to all applicable
local and national regulations and safety standards.
This manual is intended to assist in the installation and
operation of the Blackmer truck pumps, and
MUST be kept
with the pump.
Pump service shall be performed by qualified technicians
ONLY . Service shall conform to all applicable local and
national regulations and safety standards.
Thoroughly review this manual, all instructions and hazard
warnings,
BEFORE performing any work on the pump.
Maintain
ALL system and pump operation and hazard
warning decals.