background image

BLACKMER LIQUEFIED GAS PUMPS 

964480

 

INSTRUCTIONS NO. 701-B00 

FOR CO

SERVICE TRUCK AND BASE MOUNTED 

INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS

 

Section 

Effective 

Replaces 

701 
Nov 2007 
Oct 2007 

MODELS: CRL2, CRL3, CRL3-OE1 

DISCONTINUED MODELS: TCRL2, TCRL3 

 

Patent Protected by U.S. Patent 6030191 and Related Foreign Patents. 

 

 

TABLE OF CONTENTS 

Page

 

PUMP DATA

 

 Technical Data ...................................................... 2 
 

Initial Pump Start Up Information........................... 2 

INSTALLATION

 

 Pre-Installation Cleaning ....................................... 3 
 Location 

and 

Piping............................................... 3 

 

Pump Relief Valve and Bypass valve .................... 4 

 Check 

Valves ........................................................ 4 

 Mounting ............................................................... 4 
 Pump 

Drives.......................................................... 4 

 

     Coupling Alignment .......................................... 4 

 

     V-Belt ............................................................... 5 

 

     PTO.................................................................. 5 

 

     Hydraulic .......................................................... 6 

 Pump 

Rotation....................................................... 6 

 

To Change Pump Rotation .................................... 6 

OPERATION

 

 Pre-Start 

Up 

Check List......................................... 7 

 Start 

Up 

Procedures.............................................. 7 

MAINTENANCE 

Strainers................................................................... 8 
Lubrication................................................................ 8 
Vane Replacement................................................... 9 
Pump Disassembly .................................................. 9 
Parts Replacement................................................... 9 
Pump Assembly ..................................................... 10 

TROUBLE SHOOTING

................................................. 11 

NOTE

: Numbers in parentheses following individual parts 

indicate reference numbers on Blackmer Parts List No.  
701-B01. 

Blackmer pump manuals and parts lists may be obtained 
from Blackmer's website (www.blackmer.com) or by 
contacting Blackmer Customer Service. 

 

SAFETY DATA 

 

This is a SAFETY ALERT SYMBOL. 

When you see this symbol on the product, or in the manual, 
look for one of the following signal words and be alert to the 

potential for personal injury, death or major property 

damage 

 

Warns of hazards that WILL cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause personal injury 

or property damage. 

NOTICE: 

Indicates special instructions which are very 

important and must be followed. 

 

 

NOTICE: 

Blackmer CO

2

 pumps MUST only be installed in 

systems which have been designed by qualified 
engineering personnel. The system MUST conform to 
all applicable local and national regulations and 
safety standards. 

This manual is intended to assist in the installation 
and operation of the Blackmer CO

2

 pumps, and 

MUST be kept with the pump. 

Blackmer CO

2

 pump service shall be performed by 

qualified technicians ONLY. Service shall conform to 
all applicable local and national regulations and 
safety standards. 

Thoroughly review this manual, all Instructions and 
hazard warnings, BEFORE performing any work on 
the Blackmer CO

2

 pumps. 

Maintain ALL system and Blackmer liquefied gas 
pump operation and hazard warning decals. 

 

 

 
 

Содержание CRL2













Отзывы: