Blackmagicdesign MultiDock Скачать руководство пользователя страница 13

Regulatory Notices

Disposal of Waste of Electrical and Electronic Equipment Within the European Union.

The symbol on the product indicates that this equipment must not be disposed of with 
other waste materials. In order to dispose of your waste equipment, it must be handed 
over to a designated collection point for recycling. The separate collection and 
recycling of your waste equipment at the time of disposal will help conserve natural 
resources and ensure that it is recycled in a manner that protects human health and 
the environment. For more information about where you can drop off your waste 
equipment for recycling, please contact your local city recycling office or the dealer 
from whom you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. Operation of this product in 
a residential area is likely to cause harmful interference, in which case the user will be 
required to correct the interference at personal expense.

Operation is subject to the following two conditions:

This device may not cause harmful interference. 

This device must accept any interference received, including interference that  
may cause undesired operation.

ISED Canada Statement

This device complies with Canadian standards for Class A digital apparatus.

Any modifications or use of this product outside its intended use could void 
compliance to these standards.

This equipment has been tested for compliance with the intended use in a 
commercial environment. If the equipment is used in a domestic environment,  
it may cause radio interference.

13

Regulatory Notices

Содержание MultiDock
















Отзывы: