Blackmagicdesign ATEM Series, Инструкция по установке и эксплуатации

Страница: 26 / 289

Safety Information
The following safety information applies to mains powered products.
This equipment must be connected to a mains socket outlet with a protective
earth connection.
To reduce the risk of electric shock, do not expose this equipment to dripping
or splashing.
This equipment is suitable for use in tropical locations with an ambient temperature of
up to 40ºC.
Ensure that adequate ventilation is provided around the product and is not restricted.
When rack mounting, ensure the ventilation is not restricted by adjacent equipment.
No operator serviceable parts inside. Refer servicing to your local Blackmagic Design
service centre.
Use only at altitudes not more than 2000m above sea level.
Some products have the facility to connect small form-factor transceiver (SFP) optical
fibre modules. Only use Laser class 1 optical SFP modules.
Recommended Blackmagic Design SFP modules:
‚
3G-SDI: PL-4F20-311C
‚
6G-SDI: PL-8F10-311C
‚
12G-SDI: PL-TG10-311C
Warning for Authorized Service Personnel
Caution - Double Pole/Neutral Fusing
The power supply contained in this equipment has a fuse in both line and
neutral conductors and is suitable for connection to the IT power distribution
system in Norway.
26 Safety Information