Blackmagicdesign ATEM Mini, Инструкция по установке и эксплуатации

Страница: 46 / 2014

The FTB button will fade the whole program video output to black at the rate specified in the
fade to black RATE window. Once the program output has been faded to black, the FTB button
will flash red until it is pressed again. Doing so will fade up from black at the same rate, or you
can enter a new rate in the fade to black palette in the ‘switcher’ window. Fade to black is
mostly used at the start and end of your production, or when cutting to commercial breaks. It
ensures all layers in ATEM Mini are faded down together. A fade to black cannot be previewed.
You can also set the audio mixer to fade the audio with your fade to black by selecting the
‘audio follow video’ checkbox in the fade to black palette, or by enabling the AFV button on the
master audio output fader.
Processing Palettes
The software control panel features tabs for the processing palette, media player, and
output options.
TIP The palettes also show the order of the processing in the switcher. You can
expand and minimize palettes to save space and scroll them up and down to get the
adjustments you need to set.
The following processing palettes are available.
Palettes Tab
The ‘palettes’ tab contains the following processing controls.
Color Generators Your ATEM switcher has two color matte generators which can be configured
from the color generators palette using a color picker or by setting hue,
saturation, and luminance levels.
SuperSource ATEM Mini Extreme model switchers include a feature referred to as
SuperSource that will allow you to arrange multiple sources on the monitor at
one time. For more information refer to the section ‘Using SuperSource’ later
in this manual.
Upstream Key The switcher’s upstream keyer can be configured from the upstream key
palette. Within the keyer palette, the keyer can be configured as a luma key,
chroma key, pattern key or DVE. The type of key available will also depend on
if the DVE is available. The upstream key palette will display all the parameters
that are available to configure the keyer. More information on how to use
upstream keyer is included later in this manual.
46 ATEM Software Control