• Length – 5.04” / 128 mm
• Max. Diameter – 1.10” / 28 mm
• Battery Type – CR123A x 2
• Lamp Type – 3-watt LED
• Output for the Ally PL3 – 65 lumens
• Run Time for the Ally PL3– 4 hours
• Output for the Ally PL3x – 50 lumens –
HI / 12 lumens - LOW
• Run Time for the Ally PL3x – 4 hours –
HI / 20 hours – LOW
Battery Installation Instructions
Both the Ally PL3 and the Ally PL3x Illumination
Tools require the proper installation of CR123A
lithium batteries (only). Insert two NEW 3-volt
CR123A batteries with positive (“+”) terminal end
first towards the bezel end of the device. Use only
high quality batteries such as Duracell, Panasonic
or Night-Ops brands. The batteries are installed or
changed by unscrewing the rear portion of the light
by grasping the tailcap portion of the light with one
hand and then turning the tailcap counterclockwise
with the other until the tailcap housing can be
removed. After the batteries are installed place
the tailcap back on the end of the body and then
screw it in a clockwise direction until it is snug.
Battery Specifications
Temperature Specifications (Battery)
STORAGE: -20°C (-4°F) to 45°C (113°F)
OPERATING: -40°C (-40°F) to 48°C (120°F)
BATTERY TYPE: CR123A camera battery, ANSI:
5018LC, IEC: CR17345
WARNING:
Lithium batteries can explode or cause
burns if disassembled, shorted, recharged or
exposed to fire or high temperatures. Please handle
with care. Do not mix new batteries with used or
other battery types/brands or dispose of batteries
in the trash. If it is necessary to dispose of any bat-
teries, do not do so by fire, mutilation or by disas-
sembly, as this may cause toxic chemicals to be
released.
Note: Both the Ally PL3 and the Ally PL3x
Illumination Tools project a significant amount of
heat that dissipates throughout the body of the light
as it is used. After several minutes of continuous
use you may feel some heat while holding the flash-
light but this is normal and the flashlight will contin-
ue to function properly.
WARNINGS:
• Neither the Ally PL3 nor the Ally PL3x Illumination
Tools are toys nor should they be treated as one
• Keep both the Ally PL3 and the Ally PL3x
Illumination Tools away from children
• The LED and the battery will generate heat; do
not hold the bezel or lens of an activated Ally PL3
or Ally PL3x Illumination Tool against any portion of
the human body.
• Do not stare directly into the light; momentary
blindness and/or eye damage could result.
• Use caution when using the light as it can cause
momentary blindness and/or disorientation within
the subject and surrounding individuals.
WARRANTY
Dear Valued Customer:
Thank you for choosing Night-Ops® Illumination
Tools! Night-Ops Illumination Tools are warranted
to their original owner to be free from defects in
parts and workmanship for the life of that owner.
Excluded from this warranty are the batteries, bulbs
(lamps), and electronics found within the Night-Ops
line. There is no coverage for the batteries and
bulbs (lamps) but the electronics are covered by a
one year warranty with proof of purchase. At our
option, Blackhawk Products Group™ will repair,
replace or refund the purchase price of any of the
Night-Ops products that are found to be defective
under these guidelines unless it is damaged due
to ordinary wear and tear, damaged due to lack
of proper maintenance, damaged by employment
outside of their areas of intended use, damaged
through misuse of the product or by failure to follow
the instructions and warnings contained herein.
The following conditions and exclusions also apply:
Disassembly of any part of the Illumination Tool other
than for battery or bulb (lamp) replacement (as
described in the instruction manual) will void this
warranty as will alteration, misuse, battery leakage
or lack of proper maintenance. Normal wear is to
be expected under this warranty. For each
Illumination Tool submitted for warranty considera-
tion, you must first obtain a Return Merchandise
Authorization (RMA) number from BlackHawk
Products Group. Please contact BlackHawk
Products Group at 1-800-694-5263 (phone), 888-
830-2013 (fax) or cs.blackhawk.com (eMail) to
receive a Return Authorization Number. Please take
a moment to fill out the attached card and return to
the address provided. The information you provide is
invaluable in helping us to continue to design innova-
tive & dependable Illumination Tools. It will also
enable us to send you information on new products
as well as special sales promotions taking place at
your nearest Night-Ops Authorized Dealer.
BLACKHAWK PRODUCTS GROUP
NORFOLK, VA, USA
BLACKHAWK.COM
8 0 0 . 6 9 4 . 5 2 6 3
