background image

TECH MAG 1

TECH MAG 1™ DIRECTIONS

  1.   Fold out both front legs to their fully extended positions.

  2.   Unthread the RU Adjustment Knob until the Resistance Unit will not interfere with the bicycle wheel  

during installation. 

  3.   Install supplied quick release skewer (QR) into rear wheel. Follow your bicycle/wheel manufacturer  

recommendations for removing and installing quick releases or have a qualified bicycle shop replace it for you.

    

 WARNING! The mounting cones of your Blackburn trainer have been designed specifically to work with 

the supplied quick release skewer (QR). Mounting a bicycle to the trainer with any other fastening device can 
make it unstable or result in serious injury. 

  4.   Check the pressure in the tires and make sure they are at or near the maximum rating indicated on the side of 

the tire. NOTE: Low tire pressure can increase tire wear and potentially cause slippage on the RU roller.

  5.   During shipping, the wheel adjustment knobs are fully tightened. Standing behind the trainer, first unthread 

the left hand adjustment knob to retract the skewer cone followed by unthreading the right hand adjustment 
knob to fully retract the right skewer cone. 

  6.   Place rear wheel of bicycle into trainer with left side of QR against left cone. Rotate the cone until the there is 

no interference with the QR lever. Turn left side adjustment knob until tire is centered over the roller of the RU. 
Thread inner lock nut against the trainer frame. NOTE: Once the left cone has been positioned and locked it 
does not need to be adjusted again until a different bicycle is used.

  7.   Slowly thread the right hand adjuster to extend the right side cone and lock right side of QR into the trainer 

frame. Once QR is locked in place between the cones thread inner lock nut against trainer frame.

  8.   Before getting on the bicycle carefully check that it is securely fasted to the trainer by pushing side to side on 

the saddle to see if you can twist it out of the trainer frame. 

  9.   Screw in the adjuster knob on the RU until the tire is slightly deformed by the RU roller. NOTE: Putting too much 

tension on the RU against the tire can cause premature wear of the tire and stress on the RU unit.

 10.   Carefully get on the bicycle and start pedaling slowly. Do not make any sudden moves until you are sure the 

bicycle is securely mounted in the frame, if loose repeat steps 6–12.

 11.  Caution when in use:
    •  Keep both hands on handlebars at all times.
    •  Make sure all bolts and nuts are securely fastened prior to using.
    •  Never brake suddenly while using the trainer, this results in unnecessary wear and tear to the rear tire.
    •  Keep away from small children.
    •  Rider weight limit 330lbs / 150kg

 WARNING! The RU will get hot to the touch during use. Keep children or pets away from the trainer when in 

use and sometime afterward until it cools down.

 WARNING! The use of any indoor trainer creates a hazard to others due to the number of rotating parts, etc. 

Be sure to always use your trainer in an open space to eliminate the possibly of contact with people or things that 
could be injured or damaged. Keep people or animals away from the trainer when in use. 

NOTE: You are more likely to drip sweat onto your bicycle frame, components and floor while riding a trainer vs. 
normal riding. The use of the Blackburn Sweat Net (sold separately) can reduce the likelihood of corrosion of your 
bicycle and damage to your floor due to sweat build up.

EASTON-BELL SPORTS FULL LIFETIME WARRANTY OF BLACKBURN PRODUCTS

What is Covered  
This warranty covers any defects in materials or workmanship, with the exceptions stated below.

How Long Coverage Lasts 
This warranty runs for as long as the original purchaser owns the product.

What is Not Covered 
This warranty does not cover abuse, normal wear and tear, or anything resulting from the modification or alteration 
of the product in any way, or using the product for anything other than its intended purpose. 

What Blackburn Will Do 
Blackburn will repair, replace, or refund the full purchase price of your product, whichever you prefer.

How To Get Service 
Contact any Consumer Service at (800) 456-2355 or www.blackburndesign.com

How State Law Applies 
This warranty gives you specific legal rights, and you may also have other rights which vary from state 
to state.

© 2014 Bell Sports, Inc.

Customer Service 1-800-456-2355

Printed in China 

blackburndesign.com

Skewer

Отзывы: