877-877-2269 | blackbox.com
877-877-2269 | blackbox.com
877-877-2269 | blackbox.com
Page 5
Page 6
© Copyright 2016. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
Quick Start Guide
LPH1000 Series Industrial Ethernet PoE Switch
LPH1006A
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 877-877-2269
Web site: www.blackbox.com
E-mail: [email protected]
Customer
Support
Information
LPH1006A Quick Start Guide
lph1006a_qsg_rev2
Table 2-1. Switch components.
Number in
Figure 2-1
Component Description
1
(2) Power
LEDs
Light when unit is
powered on.
2
(2) SFP Speed
DIP Switches
Selects 100M/1G.
3
(2) SFP Link/
Act LEDs
Light when SFP Link is
active.
4
(2) SFP slots
SFP module (LFP401–
LFP404, LFP411–
LFP414, LFP416) installs
here
5
(4) Gigabit
RJ-45 PoE
ports
Link to 10/100/1000-
Mbps PoE Ethernet
devices or segments
6
(1) Power
Fault LED
Lights when power is
on.
7
(4) RJ-45
port LINK/
ACT LEDs
ON when port is con-
nected;
OFF when port is not
connected;
Flashing when data is
transmitted or received
8
(4) RJ-45
port PoE
LEDs
ON when port is using
PoE;
OFF when port is not
using PoE
NOTE: SFP modules are ordered separately.
Table 2-2. Relay output DIP switches (#9 in Figure 2-1).
Code
Description
LFP401
SFP, 155-Mbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 2 km
LFP402
SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Multimode, 2 km, LC
LFP403
SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 30 km, LC
LFP404
SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 60 km, LC
LFP411
SFP, 1.25-Gbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 300 m
LFP412
SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Multimode, LC, 2 km
LFP413
SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 10 km
LFP414
SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 30 km
LFP416
SFP with SGMII Interface, 1.25 Gbps, Copper,
10/100/1000BASE-T, Extended Diagnostics
Table 2-3. Compatible SFPs.
DIP-1 DIP-2 Description
OFF
OFF
Power failure relay alarm disabled.
ON
OFF
PWR-1 failure, relay alarm enabled
OFF
ON
PWR-2 failure, relay alarm enabled.
ON
ON
PWR-1 or PWR-2 failure, relay alarm
enabled.
