blackbox-av VideoClip HD8, Руководство пользователя

Страница: 13 / 16

13
The VideoClip can be programmed to
play content upon PIR activation.
Simply connect the PIR to the I/O input. A
looping display can be utilised in PIR
mode just as in the previous modes, this
means the VideoClip can display video or
images in a looping fashion until the PIR
activates content stored in the folder.
The above content will loop through the 3
images until PIR activation. Once
triggered it will play the file located in
folder ‘01’ , before returning to the looping
3 images.
To configure PIR mode, open the
AutoPlay.txt file. The command
"sensor_mode=1" must be defined at the
beginning of the file.
The above text file assigns the PIR to play
content in folder
‘01’. The default volume
(0-31) is set to 15.
Note: The PIR is sold separately and must
be connected via the I/O port.
Once connected, the VideoClip is set to
uninterruptible playback which means
any files located in folder ‘01’ will be
played through in their entirety before PIR
can be activated again.