Page 8
Button 1 plays next file
Button 2 plays previous file
Button 3 increases volume
Button 4 decreases volume
Button 5 mutes volume
This ‘Autoplay.txt’ assigns ‘
NEXT
’ and ‘
PREVIOUS
’ commands to button 1 and 2. The
VC-HD will continually loop through each video until these buttons are pressed.
Button 3 and 4 adjust the
volume
while button 5 will
mute
and
unmute
the player.
BUTTON EXAMPLE 4: PLAY ALL / 5 INDIVIDUAL FILES
The above content will display a single image ‘AttractaImage1’ until a button is
pressed, the following ‘Autoplay.txt’ file assigns actions to 5 buttons -
Button 1 plays all files in folder ‘01’
Button 2 plays file ‘01’ in folder ‘01’
Button 3 plays file ‘02’ in folder ‘01’
Button 4 plays file ‘03’ in folder ‘01’
Button 5 plays file ‘04’ in folder ‘01’
Button 6 plays file ‘05’ in folder ‘01’
01 is uninterruptible once pressed all
content will play before another
button can be used.
This ‘Autoplay.txt’ assigns folder ‘
01
’ to button 1, essentially becoming a ‘
PLAY ALL
’
button, when pressed the player will display each video in sequence then return to
the attracta screen.
Buttons 2 - 6 have been assigned to
specific video files
within folder ‘
01
’, when
pressed only that video will play before the VC-HD returns to the attracta screen.
NOTE
: When assigning specific files to a button the full filename including filetype
must be used i.e ‘video1.mp4’ not simply ‘video1’.
PIR ACTIVATION
The VC-HD can be programmed to play content upon PIR activation.
A single PIR can be connected via the I/O input and used to activate a folder of
content, this can include video, audio or image files.
A looping display can be utilised in PIR mode just as in the previous modes, this
means the VC-HD can display video or images in a looping fashion until the PIR
activates folder 01 and the content found within.
