7
5.
DISPLAY OFF: Press the button to turn off the connected displays. The
LED blinks green when the signal is sent. Note that the connected
displays must support the CEC feature to be controlled by the splitter.
6.
VOL-/MUTE/3s: Momentarily press the button to decrease the volume
level of the connected displays. Press and hold the button for 3 seconds
to toggle audio mute on or off on the connected displays. Note that the
connected displays must support the CEC feature to be controlled by
the splitter.
7.
VOL+: Momentarily press the button to increase the volume level of the
connected displays. Note that the connected displays must support the
CEC feature to be controlled by the splitter.
8.
EDID: Three position slider switch to select the method by which the
video source device obtains EDID® data. When in the L.RES position, the
system reads the EDID data for all connected displays and selects the
one with the lowest resolution. When in the PRESET position, the system
sends the EDID preset setting selected with the EDID PRESET DIP
switches on the rear panel. When in the H.RES position, the system reads
the EDID data for all connected displays and selects the one with the
highest resolution.
9.
FW: Micro USB port for performing a firmware upgrade. Refer to the
FIRMWARE UPGRADE
section below for update instructions.
Rear Panel
1.
IN: HDMI® port for connecting the video source device.
