Blackbird 24180, Руководство пользователя

Страница: 11 / 47

11
•
Press and hold the LOCK button for about 3 seconds to lock or unlock the other
front panel buttons. The LED next to the LOCK button illuminates blue when the
front panel buttons are locked.
• Press and hold one of the PRESET buttons to save the current switching layout to
the corresponding preset. Momentarily press one of the PRESET buttons to load the
corresponding preset. The LED next to the selected PRESET button illuminates blue
to indicate that it is selected.
Note: The matrix supports six presets, but only presets 1~4 can be accessed using
the front panel controls. Presets 5~6 can be managed using the built-in web GUI or
RS-232 control commands.
•
Press the ENTER button to execute any pending commands.
•
Press the CANCEL button to clear any pending commands.
IR Remote Control
• Press the STANDBY button to turn the matrix on or to put it
into standby mode.
•
To switch the selected input for one or more of the outputs,
first press the number button in the INPUTS section
corresponding to the desired input, then press one or more
number buttons in the OUTPUTS section or the ALL button in
the MENU section for all outputs, and finally press the ENTER
button in the MENU section to execute the change.
•
To set the EDID® for one or more source devices to the EDID
capabilities of a specific output, press the EDID button, then
press one or more number buttons in the INPUTS section
corresponding to the desired input(s) or the ALL button in
the MENU section for all inputs, then press a number button
corresponding to the OUTPUT with the desired EDID settings,
and finally press the ENTER button in the MENU section to
execute the change.