Welcome to your wireless solution — Upgrading to version 2.0
Installation and User’s Guide
15
Upgrading to version 2.0
If you are currently using a previous version of the Desktop
Software, you should upgrade to version 2.0. Before installing the
new software on your desktop and your handheld, you should
perform a backup to store the contents of your handheld (such as
Address Book entries, messages, and calendar items) on your PC.
See Chapter 3 or the Backup and Restore online help for instructions
on performing a backup.
Once you have backed up your handheld information to your PC,
follow the instructions on page 48 to install.
Contents of your package
Your package should contain the following:
•
Handheld
•
Charging Cradle
•
Holster
•
This Installation and User’s Guide
•
Handheld Getting Started Card
•
Installation CD-ROM
If something from this package is missing or not working properly,
contact the point of purchase.
System Requirements
The following components are required to install the Desktop
Software:
•
Intel-compatible 486 or higher desktop with an available serial
port
•
Windows 95/98/2000 with 8 Mb of RAM