Installation and User’s Guide
Customizing your handheld’s options — Handheld options
138
Status:
Shows the status of the network. It is set to either Pending or
Active, depending on what you have specified in the Roaming field.
PowerSave:
Puts the handheld in a mode where it can save more
power. You can choose from Maximum, Average, or Minimum.
Each one provides progressively better power savings. The default
setting is Maximum. We recommend against changing this field.
Notify
You can press the
SPACE
key to set the handheld message
notification to tone/vibrate, vibrate, tone, or none. See page 39 for
details on how to set the notification options.
In Holster:
Customize the way that the handheld notifies you of a
new message while it is in the holster. Your options are: Tone,
Vibrate, Tone, or None. The default notification setting is
Tone.
Out of Holster:
Customize the way that the handheld notifies you
of a new message when it is out of the holster. Choose from: Tone,
Vibrate, Tone, or None. The default notification setting is
Tone.
Tune:
Select the tune you wish to hear when you are notified of a
new message. You can hear each tune by scrolling through the
options. The default is Tune 1.
Volume:
Select the volume for your notification tune. Choose from
Low, Medium, High, Escalating, or Off. If you set your notification
Note
You can re-register with the network in the
Network
Settings
screen. Click to view the menu, scroll to Register
Now and click. Unless you have been advised to do so, or if
you have just received your handheld and it is not working,
we recommend against registering your handheld more
than once.