TURBO LITE
CABIN
www.blackwolf.com.au
Congratulations on choosing a BlackWolf Turbo Lite
tent, please read through this instruction booklet
thoroughly before using your new tent.
BEFORE YOUR FIRST CAMPING TRIP
We strongly recommend you pitch your tent before
you take it away for the first time to familiarise
yourself with the process and to double check that all
the components are included.
We recommend you weather your tent by hosing it
thoroughly, the stitching in the bound seams will
swell and this will help seal the stitching holes.
Please note and fully understand that no tent can be
guaranteed 100% waterproof. Whilst the fabric your
tent is made from is waterproof in certain weather
conditions such as strong wind and driven rain can
cause some leakage through seams and zippers.
USING YOUR TENT
Always peg out all guy ropes at all times. In cool
weather or high humidity condensation can form
inside your tent. This is not coming through the
fabric but is water vapour that is inside the tent
(created when you breathe and perspire and also
from evaporation off wet items inside your tent).
The best way to minimise condensation is to
maximise ventilation by opening gusseted windows,
vents and doors to allow air to flow through.
AFTER USE CARE
Where possible clean and dry your tent before
packing it away, if the weather is bad and you have to
pack your tent wet it is important to get it out and
thoroughly dry it as soon as possible. NEVER store
your tent wet, mildew can form on the fabric, pegs
and other components can corrode. After coastal
camping trips you should rinse your gear in fresh
water.
Store your tent in a dry, well ventilated place.
COMPONENT LIST
1 x Turbo Lite tent with frame attached
1 x Turbo Lite standard fly
12 x Guy ropes (already attached to your tent and
packed in fin pockets)
4 x Loose guy ropes for windows
3 x Awning poles & 1 x Awning ridge pole
36 x steel pegs in peg bag
1 x Turbo tent bag
0716
