General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and
practice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety Warnings
• Read and understand all instructions. Failure to follow all instructions listed may result in serious
injury.
• Do not exceed the
600
lb weight capacity. Distribute the load evenly.
• Only load the carrier on flat and level surfaces capable of supporting its maximum load.
• Prior to transport, make sure the ramp of the carrier and the motorcycle are properly secured to the
carrier.
• When not in use, store the carrier in a secure place out of the reach of children.
• Be aware of the possible fire risk and property damage resulting from the vehicle’s exhaust system
pointing at or running near the cargo in the carrier. Do not use if this condition exists.
Maintenance
• It is recommended that the general condition of any steel motorcycle carrier be examined each
time before it is used. Keep your steel motorcycle carrier in good repair by adopting a program of
conscientious repair and maintenance. Check misalignment, loose or damaged parts, and any oth-
er condition that may affect its safe operation. If any abnormal vibrations or noise occur, have the
problem corrected before further use. Have necessary repairs made by qualified service personnel.
• Before each use, make sure any dirt, debris, oil, grease, etc. is cleaned off the carrier. Cleanthe
carrier with a clean, moist cloth. Do not use solvents.
• Periodically check all hardware for tightness.
Heavy Duty Steel Motorcycle Carrier
Instructions for Part # MCC-600
