background image

9

Active

. Pressing transmitter button 4 with the

ignition on will manually activate the Anti-

Carjacking feature.

Passive

. When selected, the Anti-Carjacking

feature will activate whenever a door is

opened while the ignition is on.

Full-time

. When selected, the Anti-Carjacking

feature will automatically activate each time

the ignition is turned on.

Adjusting Sensors

The sensor test mode allows quick and easy

sensor tuning.
To adjust the sensor(s):

1. Turn on the ignition.
2. Press Transmitter Button 5 then button 4.
3. Test the sensors.

• The siren chirps indicate the zone.

Short chirp = warn (shock/optional)

Long chirp = Shock Trigger

2 long chirps = Optional Trigger

4. Turn off the ignition.

Testing System

Arm and disarm system, checking that the

siren chirps and parking lights are functioning

normally. Make sure that the programmed

features are performing correctly, ie.: ignition

locks, passive arming, passive locks, etc. Test

the doors and hood/trunk inputs (make sure

all doors trigger the system, not just the

drivers door). Arm the system and try

starting the vehicle, it should not start.

Disarm the system using the emergency

override. Check the range of the remote

transmitters. Make sure the customer has

physical knowledge of the location of the

valet/override switch.

Programmable Features

Step

Function

Button 1 

(default)

Button 2

Button 3

Button 4

1. Arming Mode

Active

Passive

Passive w/count

2. Parking Light Output

Flash twice

30 seconds

3. Auto Rearm

Off

Auto rearm

Auto rearm w/lock

4. Arming Chirps

Normal 

Silent

5. Trunk Disarm 

Off

On 

6. Ignition Locking

On

Off

7. Ignition Unlocking

All doors

Driver only

Off

8. Door Unlock Pulse

1sec L/1sec UL

3sec L/3sec UL 1 secL/1 ec UL x2 30sec L/1sec UL

9. Passive Locking

Off

On

10. Open Door Report

10 seconds

60 seconds 

11. Siren / Horn Chirps

Siren only

Horn chirps

Horn chirps w/warn 

12. Auxiliary 1 Output

Momentary

Timed

Latched

13. Auxiliary 2 Output

Momentary

Timed

Latched

14. Auxiliary 3 Output

Momentary

Timed

Latched

Ignition latched

15. Auto Activate Aux 2

Off

On Arming

On Disarming

16. Entry Delay w/Passive  Off

On

17. Horn Honk Output

Flashing

Continuous

18. Car Jack Mode

Off

Active 

Passive

Full-time

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 9

Содержание 5-BUTTON SERIES













Отзывы: