4
• BLUE/WHITE WIRE - Passenger unlock
output (-) 500mA. The BLUE/WHITE wire
provides a ground to unlock the passenger
doors when the unlock button on the
transmitter is pressed two times. To install
the two-step unlock feature,
the
BLUE/BLACK and BROWN/BLACK wires
must be run directly to the driver’s door
actuator unlock wire and the BLUE/WHITE
wire must be connected to a relay to unlock
the passenger doors.
(see Optional Two-Step
Unlock Diagrams)
• YELLOW WIRE - Ignition input (+).
Connect to the main ignition wire that
sw12V and does not drop out during
cranking.
2-Pin Red Connector:
Plug-in connector
port for LED. Mount LED in an area where
it may be easily seen from either side of the
vehicle.
2-Pin Blue Connector:
Plug-in connector
port for program/service switch. Mount
program switch in an area that is easily
accessible from the driver’s position.
PROGRAMMABLE FEATURES
To enter program mode:
1. Turn on ignition.
2. Within 5 seconds, press valet switch 5
times.
• The horn will provide a long chirp, to
indicate entering program mode.
3. Press the valet switch the number times
equal to the desired feature.
• The horn will chirp and lights/LED will
flash, each time the valet switch is
pressed.
4. Within 5 seconds, press the transmitter
button corresponding to the desired
operating mode for that feature.
• The horn will chirp and lights will flash
to indicate the setting.
One chirp/flash = Button 1
Two chirps/flashes = Button 2
5. Turn off ignition to save changes.
FEATURE DESCRIPTION
1. Ignition Lock/Unlock. Automatically
locks the doors when the ignition is turned
on and unlocks when the ignition is turned
off.
2. Door Unlock Pulse. Selects between a
single or double unlock pulse.
3. Chirp Mode. Selects or bypasses the
system’s lock’unlock confirmation chirps.
4. Door Lock PulseLength. Selects
between a .75-second or 3-second
lock/unlock pulse.
5. Passive Starter Defeat. Enables the
starter defeat to automatically activate 45
seconds after turning off the ignition.
6. Ignition Trigger. Enables the ignition
trigger feature when the system is remotely
locked.
Remote Programmable Features:
Step
Function
Button 1 (Default)
Button 2
1.
Ignition Controlled Door Locks
On
Off
2.
Door Unlock Pulse
Single
Double
3.
Chirp Mode
Standard
Silent
4.
Door Lock Pulse Length
.75 Seconds
3 Seconds
5.
Passive Starter Defeat Enable
Off
On
6.
Ignition Trigger Feature
Off
On
