on), and you wish to keep system from
arming but wish to retain keyless entry
features:
1. Disarm the system.
2. Turn ignition to on.
3. Press and hold valet/override switch
for approximately 3 seconds.
4. LED will turn on solid.
To exit Valet mode: Repeat the proce-
dure, LED will turn off momentarily.
Emergency Override: If you lose your
remote or it becomes inoperable, and
system is armed:
1. Open door and enter vehicle (Lights
will flash).
2. Turn ignition key to on.
3. Press the override switch.
4. System will disarm, and automatically
enter Valet mode, regardless of whether
system is programmed to passively or
actively arm.
Code Learning Mode: If you wish to
“teach” the system different remote con-
trols:
1. Make sure system is disarmed or in
valet mode,
3
Summary of Inputs and outputs:
Inputs:
Outputs
1 Sensor port-4 wire (w/warn away)
Siren output: 3 amp Max - positive
1 Sensor port -3 wire
Flashing lights: relayed - 15 amp Max
Negative door trigger
Starter Interrupt: relayed:40 amp (N.C.)
1 Negative hood/trunk trigger
Dome Light: relayed- 15 amp Max
1 Positive door trigger
Door lock/unlock: relayed* 15 amp max
2 nd Channel: 500 ma- negative
3rd Channel: 500 ma - negative
*Module with door lock relays on board
Armed Output: 250 ma - negative
Dip Switch Programmable Features:
Switch #1= Lock/Unlock Pulse Time:
ON= .75 seconds
OFF= 3 seconds
Switch #2= Ignition Triggered Door Locks: ON= Feature On
OFF= Feature OFF
Switch #3= Passive Door Locks:
ON= Feature On
OFF= Feature OFF
Switch #4= Passive or Active Arming:
ON= Passive Arm
OFF= Active Arm