manualshive.com logo in svg

Black Horse Model SUPER TUCANO BH173, Инструкция по эксплуатации, Страница: 1 / 43

Поделиться
Скачать
Black Horse Model SUPER TUCANO BH173 Скачать руководство пользователя страница 1

Instruction Manual Book

Item code: BH173

SUPER TUCANO

SUPER TUCANO

Glow and EP

OPTION ELECTRIC RETRACT GEAR (NOT INCLUDING).

ONLY INCLUDING CNC SUSPENSION METAL STRUTS.

ALL BALSA – PLYWOOD CONSTRUCTION.

COVERED WITH ORACOVER.

95% ALMOST READY TO FLY

SPECIFICATION

-  Wingspan:1,730 mm  (68.1in).

-  Length: 1,752 mm (67in).

-  Weight: 4.7 kg (10.34lbs).

-  Wing area: 47.6 dm

2

.

-  Wing loading: 98.74.g/dm

2

.

-  Servo mount: 42mm x 21mm.

-  Spinner: 70mm

-  Wing type: NacaAirfoil.

-  Gear type: Electric retract gear, 

size: (92.2 x 51 x 30.6)mm(not included).

CNC Suspension Metal Struts (included).

Parts listing required (not included):

-  Radio: 07 channels.

-  Servo: 08 servos.

-  Engine: 65-95    2 stroke, 15cc gas.

-  Motor: Brushless Outrunner 1200-2200W, 650KV. 

-  Propeller: Suit with your engine.

Recommended motor and battery set up (not 

included):

-  Motor:  RIMFIRE.60.

-  Lipo cell: 6 cells 4,000-5,000mAh.

-  Receiver battery: 6V/ 1200-2000mAh.

-  ESC: 80A.

Made in Vietnam

Содержание SUPER TUCANO BH173












































Отзывы:

Нет отзывов