Black Horce Model WESTLAND WYVERN BH105, Инструкция по эксплуатации

Страница: 30 / 35

30
WESTLAND WYVERN
- Item code:BH105 INSTRUCTION MANUAL.
INSTALLATION AIR TANK
Air tank

   1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.

 
 2) Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
Secure.
Switch
Do not permanently secure the receiver and
battery until after balancing the model.

 
 1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.

   2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
Air tank
Switch engine.
S w i t c h
Receiver.