4
L-13 BLANIK - Item code: BH135
.
Instruction Manual
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Servo tray.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
I. AILERON
1.INSTALLING THE AILERON SERVOS
( LEFT WING 1)
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
Left wing 1
Aileron
REPLACEMENT SMALL PARTS
Bottom of Left wing 1
Bottom of Left wing 2
Top side.
Bottom of Left wing 1
Aileron
Remove
covering
Secure
