24
LF-107 LUNAK
- Item code: BH145
.
Instruction Manual
3. Position the battery pack and receiver
is as picture below.
Do not permanently secure the receiver and
battery until after balancing the model.
1. Plug the servo leads and the switch
lead into the receiver. You may want to
plug an aileron extension into the receiver
to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape
to hold the foam in place.
INSTALLING THE ESC-RECEIVER AND BAT-
TERY.
Plastic parts top side of
pushrod.
Bottom side.
Top side.
C/A glue.
Bottom side.
Rudder
cable.
Rudder
cable.
Elevator
pushrod.
Elevator
pushrod.
Cut.
