6
ENGLISH
(Original instructions)
7
ENGLISH
(Original instructions)
Electrical safety
Symbols on the charger
Read all of this manual carefully before using the
appliance.
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
$
The charger is intended for indoor use only.
Labels on appliance
The following symbols appear on this appliance along with the
date code.
+
Read all of this manual carefully before
using the appliance
S010QB2300040
Only use with charger
S010QB2300040
Features
This appliance includes some or all of the following features.
1. On/off power switch
2. Removable handle
3. Locking ring
4. Hose
5. Dust container door
6. LED charging indicator
7. Battery housing
8. Door latch
9. Bowl release button
10. Removable bowl
11. Accessory clip
12. 2-in-1 nozzle accessory
13. Crevice tool
14. Pet hair tool
15. Charging base
16. Accessory storage mounts
Assembly
Accessory storage mounts
Snap accessory storage mounts (16) onto the side of the
charging base (15) so the entire assembly appears as shown
on the front cover. This allows for convenient storage of
all accessories.
Mounting accessories (fig. A - C)
The 2-in-1 nozzle / brush tool (12) has a brush that can be
folded forward for dusting and upholstery cleaning.
The pet hair cleaning tool (14) is for use when vacuuming pet
hair and/or ground-in debris from carpeted or upholstery
surfaces.
Warning!
Do not use pet hair cleaning tool directly on
animals.
The crevice tool (13) allows for vacuuming in narrow and hard
to-reach places.
u
To attach an accessory, press the accessory clip (11) and
slide the accessory onto the handle (2).
u
To remove an accessory, press the accessory clip
(11) and remove the accessory.
To unwrap and extend the handle and
hose
The handle and hose can be unwrapped from the main appli-
ance for extended reach when cleaning.
Grab the handle and lift upwards. Unwrap the handle and
hose from the main appliance. The hose can extend up to
approximately 1.21m.
To place the handle and hose back onto the main appliance,
wrap the hose back underneath and around the vac making
sure that the hose fits between the two “feet” of the appliance.
Align the handle with its cradle and click back into place.
The handle (2) can be removed from the hose allowing the
accessories to be connected directly to the hose cuff (20)
when desired.
To remove the handle
u
Unclip the handle (2) from the appliance.
u
Rotate the locking ring (3) counterclockwise to release the
clips.
u
Pull the hose away from the handle.
u
Fit the accessory directly to the hose cuff (20).
To refit the handle
u
Remove the accessory from the hose.
u
Push the hose into the handle (2). Rotate locking
ring (3) clockwise until it clicks into place.
Operation
Before first use, the batteries must be charged for at least 4
hours.
Charging the battery (fig. D)
Warning!
Charge only at ambient temperatures between
10°C and 40°C. The charger supplied with this product is
intended to be plugged in such that it is correctly oriented in
floor mount position.
To charge the appliance
u
Make sure the appliance is switched off. The battery will
not be charged while the on/off power switch (1) is in the
on position.
Содержание BDH1820P
