Black Bruin BB 4 Скачать руководство пользователя страница 4

Страница: 4 / 70

General Instructions

About the manual

This manual contains the technical instructions for the Black Bruin BB and BBC series

hydraulic motors. Take these instructions into consideration when planning the use

of the product.
All information given in this manual is current and valid according to the information

available at the time of publication. The manufacturer reserves the rights to

implement changes without prior notice.
Please visit www.blackbruin.com for the most recent version of this manual. The

product datasheets and the 3D-models are available from the manufacturer by

request.

Intended use

Black Bruin BB and BBC series hydraulic motors are designed to be used as hub

motors on vehicles. They can also be used in other applications that need torque for

rotary movement.

Warranty

Check the package and the product for transport damage when receiving goods. The

package is not meant for long term storage; protect the product appropriately.
Do not dismantle the product. The warranty is void if the product has been

disassembled.
The manufacturer is not responsible for damages resulting from misinterpreted, non-

compliance, incorrect, or improper use of the product that goes against the

instructions given in this document.

Product identification

The product identification data can be found on the identification plate attached to

the motor.

Figure 1. Identification plate of the motor.

Serial number

Part number

Model

Maximum allowed operating pressure

Note:
The serial number is also stamped on the motor. All manufacturing data

can be found with the serial number.

1.1

1.2

1.3

1.4

General Instructions

Product Manual

Содержание BB 4







































































Результаты поиска

Содержание BB 4

Отзывы:

Похожие инструкции для BB 4

Бренды по названию

Популярные бренды

Black Bruin BB 4, Руководство по эксплуатации продукта

Результаты поиска

Содержание BB 4

Отзывы:

Похожие инструкции для BB 4

Бренды по названию

Популярные бренды