USER GUIDE
SS8P-DVI-8X4-UCAC
AUDIO IN
CAC IN
DVI-D IN
USB IN
Input Connectivity
Output Connectivity
AUDIO OUT
CAC OUT
DVI-D OUT
USB OUT
8 PORT DVI-D W/ AUDIO AND CAC
SS8P-DVI-8X4-UCAC
SECURE KVM MATRIX
SECLECT
SOURCE
CONSOLE 1
CAC
SECLECT
SOURCE
CONSOLE 2
CAC
SECLECT
SOURCE
CONSOLE 3
CAC
SECLECT
SOURCE
CONSOLE 4
CAC
7
INSTALLATION
Single-Head Units:
1.
Ensure that power is turned off or disconnected from the unit and the computers.
2.
Use a DVI cable to connect the DVI output port from each computer to the corresponding DVI-D IN ports of the unit.
3.
Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4.
Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the
AUDIO IN ports of the unit.
5. Connect monitors to the DVI-D OUT console port of the unit using a DVI cables.
6.
Connect a USB keyboard and mouse in the two USB console ports.
7.
Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8.
Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console
interface.
9.
Finally, power on the Secure KVM Switch by connecting a 12VDC power supply to the power connector, and then turn
on all the computers.
Note:
The computer connected to port 1 will always be selected by default after power up.
Note:
You can connect up to 8 computers to the 8 port Secure KVM Matrix Switch.
Figure 7-1:
SS8P-DVI-8X4-UCAC
IMPORTANT WARNINGS - FOR SECURITY REASONS:
•
This product does not support wireless devices. Do not attempt to use a wireless keyboard or a wireless mouse with
this
product.
•
This product does not support keyboards with integrated USB hubs or USB ports. Only use standard (HID) USB keyboards
with this device.
• This product does not support microphone audio input or line input. Do not connect any microphones or headsets with
microphones to this device.
•
Connection of authentication devices (CAC) with external power sources is prohibited.