Order
toll-free
in the U.S.: Call
877-877-BBOX
(outside U.S. call
724-746-5500
)
FREE technical support 24 hours a day, 7 days a week: Call
724-746-5500
or fax
724-746-0746
Mailing address:
Black Box Corporation
, 1000 Park Drive, Lawrence, PA 15055-1018
Web site:
www.blackbox.com
• E-mail:
CUSTOMER
SUPPORT
INFORMATION
JUNE 2008
SPD010A
60-V CAT6 End-Span PoE
DIN Rail Mount
In-Line Surge Protector
Specifications
Clamping Voltage:
60 volts
Compliance:
UL
®
Listed, CE, RoHS
Interface:
PoE
Maximum Shunt Capacitance:
Less than 15 pF
Peak Pulse Current:
45 amps
Connectors:
(2) RJ-45
Size:
1.25"H x 1"W x 2.75"L (3.2 x 2.5 x 7 cm)
Weight:
0.1 lb. (0.05 kg)
What the Package Includes
• (1) 60-V CAT6 End-Span PoE DIN Rail Mount
In-Line Surge Protector
• This specification sheet
About this Surge Protector
Use this DIN rail surge protector anywhere that a 19"
rack is available. It is easy and quick to install in-line.
The DIN rail surge protector uses an avalanche diode
and thyristor technology. Low shunt capacitance
reduces signal loss. It protects your high-speed, high-
energy equipment from in-line surges at the interface
card.
DIN rail mount models for other interfaces are
available; these are described in separate manuals.
Call our FREE Tech Support for details or go to our
Web site at
blackbox.com
.
Installation
I
MPORTANT
T
HINGS TO
R
EMEMBER
1. Read and understand all instructions before
installation.
2. Never install products during a lightning storm.
3. This product is intended for indoor use only.
4. This telecommunication protection device is for
use as secondary surge protection at the
equipment level behind a primary protection
environment (see UL497A). Using the
telecommunication protection device as primary
protection voids the warranty.
5. To best protect your equipment, always keep the
cord length between the protector and
equipment to a minimum, not to exceed
10 inches.
