68
SERVSWITCH™ ULTRA
Once all of your CPU ports have been configured for the proper keyboard
mode, make sure you save the changes.
5.3.3 C
ONFIGURE
C
OMPUTERS
: M
OUSE
Use this field to tell the ServSwitch Ultra what type of mouse a given IBM PC
compatible CPU uses. The factory default is “PS/2” (non-wheel). To change a CPU
port’s mouse type, press [Enter] while the corresponding “Mouse” field is
highlighted. A mouse-type input box appears, as shown in Figure 5-8 below.
Figure 5-8. Changing a CPU port’s mouse type.
Use the arrow keys to select the desired mouse type and hit [Enter]. The input
box disappears and the new setting appears in the appropriate “Mouse” field.
The appropriate mouse driver must be loaded and configured on the CPU for
mouse communication to work properly. The differences between the various
mouse types are discussed in
Section 5.2.2
.
This option can only be set when the “Keyboard” setting is PC1, PC2, or PC3. If
the CPU is using an Apple or Sun keyboard, it
must
be configured for the same
type of mouse.
PS/2
PS/2 wheel
Serial 2-button
Serial 3-button
Configure computers
Type of computer mouse attached (change for PCs only)
Number Computer name Keyboard Mouse
1>Computer 1 PC2 PS/2
2 Computer 2 PC2 PS/2
3 Computer 3 PC2 PS/2
4 Computer 4 PC2 PS/2
5 Computer 5 PC2 PS/2
6 Computer 6 PC2 PS/2
7 Computer 7 PC2 PS/2
8 Computer 8 PC2 PS/2
9 Computer 9 PC2 PS/2
10 Computer 10 PC2 PS/2
11 Computer 11 PC2 PS/2
12 Computer 12 PC2 PS/2
13 Computer 13 PC2 PS/2
14 Computer 14 PC2 PS/2
15 Computer 15 PC2 PS/2
16 Computer 16 PC2 PS/2
PS/2
PS/2