manualshive.com logo in svg

Black Box ServSwitch Ultra KV5002MA-R2, Руководство пользователя, Страница: 2 / 96

Поделиться
Скачать
Black Box ServSwitch Ultra KV5002MA-R2 Скачать руководство пользователя страница 2

2

SERVSWITCH™ ULTRA

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the 

logo are registered trademarks, ServSwitch, ServSwitch

Ultra, Matrix ServSwitch, and ServManager are trademarks, of Black Box
Corporation.

Apple, Mac, and Macintosh are registered trademarks, and Apple Desktop Bus and

ADB are trademarks, of Apple Computer, Inc.

ProComm is a registered trademark of DATASTORM TECHNOLOGIES, INC.™

Compaq and Alpha are registered trademarks, and DEC is a trademark, of

Compaq Computer Corporation.

HP is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000, and ThinkPad are registered trademarks, and

PC/XT is a trademark, of International Business Machines Corporation.

Helvetica and Times are registered trademarks of Linotype Company.

Logitech is a trademark of Logitech, Inc.

Microsoft, Windows, HyperTerminal, and IntelliMouse are trademarks or

registered trademarks of Microsoft Corporation in the United States and/or
other countries.

SGI is a registered trademark of Silicon Graphics, Inc.

Sony is a registered trademark of Sony Corporation.

Sun and Sun Microsystems are registered trademarks of Sun Microsystems, Inc. in

the United States and other countries.

UL is a registered trademark of Underwriters Laboratories, Inc.

UNIX is a registered trademark of UNIX System Laboratories, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

Содержание ServSwitch Ultra KV5002MA-R2

































































































Отзывы:

Нет отзывов