®
Safety information
• For use in dry, oil free indoor environments only.
• Not suitable for use in hazardous or explosive environments or next to highly
flammable materials.
• The optional power adapter is only required when the link cables used
exceed 2 metres in length. Otherwise the ServSwitch TDX can derive its
power from any of the host systems via the keyboard connections.
• Warning – the optional power adapter contains live parts.
• No user serviceable parts are contained within the optional power adapter
- do not dismantle.
• Do not use the optional power adapter if the power adapter case becomes
damaged, cracked or broken or if you suspect that it is not operating
properly.
• Replace the optional power adapter with a manufacturer approved type
only.
• If you use a power extension cable, make sure the total ampere rating of the
devices plugged into the extension cable do not exceed the cable’s ampere
rating. Also, make sure that the total ampere rating of all the devices
plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
• Do not attempt to service the ServSwitch TDX unit or its remote control
yourself.
• The optional power adapter can get warm in operation – do not situate it in
an enclosed space without any ventilation.
• The ServSwitch TDX unit does not provide ground isolation and should
not be used for any applications that require ground isolation or galvanic
isolation.
• When using the optional power adapter, use only with a grounded outlet.
When using a backup power supply (UPS), power the computers, the
monitors and the ServSwitch TDX from the same supply.
Certification notice for equipment used in
Canada
The Canadian Department of Communications label identifies certified
equipment. This certification means that the equipment meets certain
telecommunications-network protective, operation, and safety requirements.
The Department does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring associated with a
single-line individual service may be extended by means of a certified connector
assembly (extension cord). The customer should be aware that compliance with
the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility—in this case, your supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give
the telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines, and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
CAUTION:
Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as
appropriate.