®
1 2
3 4
5 6
7 8
ON
1 2
3 4
5 6
7 8
ON
Configuration switch settings
The underside of the ServSwitch TDX unit features a block of eight switches
which are used to configure various fundamental settings. When shipped, all
switches are set to OFF, which produces normal operation within the ServSwitch
TDX unit. Further details about switch settings can be found within sections of
this guide dealing with specific setup issues.
OFF: Normal operation
ON: (while power applied) Reset unit
OFF: Cycle between all system ports
ON: Cycle between active ports only
OFF: Normal operation
ON: Upgrade mode
OFF: Normal operation
ON: Synchrony mode
OFF: Normal operation
ON: Auto switch to powered port
,3,4
Reserved
Note: The switch settings (except switch 8) are
consulted by the unit only during its power up
phase, i.e. when power is first supplied by a
keyboard socket of a powered system. Therefore,
change the setting while the unit is disconnected
or use switch 8 to force a reset, whereupon the
other switches will be consulted.