Black Box ServSwitch KV3104MA-R5 Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 92

Black Box ServSwitch KV3104MA-R5 Скачать руководство пользователя страница 77

SERVSWITCH™

76

6.2.5 ServSwitch Scans or Switches to Empty Ports
A.

The “Maximum computers” setting is too high. (If any of the CPUs you

can

access are receiving garbage characters, this is a good indicator.) Set
Maximum Ports to match the number of CPUs in your system. See

Section 5.2.3

.

B.

The “Expansion units” and/or “Expansion width” setting is wrong. To reach

only occupied ports, set Units equal to the number of submasters in your system,
and Width equal to the smallest number of CPUs you have on any submaster (see

Sections

5.2.4

and

5.2.5

).

6.2.6 Mouse Driver Doesn’t Load
A.

What type of mouse are you using? If it’s an RS-232 serial mouse, see steps B

    and D. If it’s a PS/2 or PS/2 wheel mouse, see steps C and D. If it’s a
    Microsoft BallPoint mouse, see step D. At the time of this writing, the
    ServSwitch does not support other types of mice.

B.

RS-232 serial mouse: Make sure that you’re using the right COM port, and

that the mouse driver is looking for the correct port.

C.

PS/2 or PS/2 wheel mouse: To recognize the mouse, the CPU must be directly

    connected to it, or indirectly connected to it through the ServSwitch and (if
    one is involved) the submaster, at boot-up time. Make sure that all cables are
    properly seated and that the Switch and submaster are ON, then reboot the
    CPU.

D.

Your mouse driver might be old or incompatible with your mouse. Try the

latest version of the Microsoft mouse driver.

6.2.7 Can’t Access Mouse Functions
A.

What type of mouse is it? If it is any other type than those listed as being

supported in item A under

Section 6.2.6

, chances are that the ServSwitch

doesn’t

support

it.

B.

If your mouse is a Microsoft BallPoint, you need the latest version of the

Microsoft

mouse

driver.

C.

If your mouse is a Logitech mouse, the ServSwitch supports the two-button

models but not the three-button models.

6.2.8 PS/2 Mouse gets Out of Sync

Cabling might have been disturbed during mouse movement. Issue the Send Null
Byte command (see

Section 4.3.7

) once or twice to get the mouse back in sync. You

need the latest version of the Microsoft mouse driver to stop this from happening.

«
...
75
76
77
78
79
...
»

Содержание ServSwitch KV3104MA-R5





























































































Отзывы:

Нет отзывов