®
To configure the unit from a global user location
1 Use either the VNC viewer or a standard web browser to make remote
contact with the ServSwitch CX Quad IP – see
for more
details.
2 If the username entry is not blanked out, enter ‘admin’. Then enter the
admin password or the username / password of a user with admin privilege
(if no password is set, then just press
). Once logged in, the ServSwitch
CX Quad IP will show the video output from the host system (if one is
connected), or otherwise a ‘No Signal’ message.
3 Click the Configure button in the top right
hand corner of the window to display the main
configuration page
Allows you to create and manage up to sixteen separate user accounts,
each with separate access permissions.
Allows you to alter both basic and fundamental settings within the unit.
Allows you to configure all aspects relating to time keeping within the unit.
Here you can alter any of the existing network settings plus you can take
advantage of the IP access control feature that lets you to specifically include
or exclude certain addresses or networks.
Lets you setup or alter the details concerning the OPTIONS serial port.
Allows you to configure user access, hot key switching
and power control codes for the connected host systems.
Provides various details about the user activity on the unit.
Allows you to configure settings which enable the unit to
consult external databases in order to verify user details.
For more information about each page, please see
Configuration pages via viewer
in the ‘Further information’ chapter.
Shaded items signify
options that are not
available via the standard
configuration menus.
Full configuration by global user
Once the basic features have been configured using the ServSwitch CX Quad IP
configuration menus, further changes can be made by authorized global users
via the VNC interface. There are two main ways to use the VNC interface to
access the ServSwitch CX Quad IP unit:
•
– a small application supplied on the CD-ROM or
downloadable from the RealVNC website or even downloadable from the
ServSwitch CX Quad IP itself.
or
•
A standard browser that supports Java
– When a web browser makes
contact, the ServSwitch CX Quad IP provides the option to download a Java
application to it. This allows a viewer window to be opened and operation
to commence just as it would with the VNC viewer application.
