®
Configuration
Almost all configuration and operational aspects of the ServSwitch CX Quad IP
unit are controlled via
Overall initial configuration
When setting up a new installation, the following stages are recommended:
1
Enable the general ‘Security’ option
With security disabled (default setting), a local or remote user attached
to the ServSwitch CX Quad IP will have full and unrestricted access to all
computers and all ServSwitch CX Quad IP settings. In larger installations,
you are strongly recommended to enable security and set up individual user
accounts with access privileges.
2
Create an ADMIN (administration) password
.
All ServSwitch CX Quad IP units have a fixed user account that cannot be
deleted or renamed, called ADMIN. If you intend to use security, then it is
important to allocate a password to the ADMIN account
.
3
Create user accounts and allocate access rights
.
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
4
.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
5 Configure the required ‘
’
Use the ADMIN account to determine key ServSwitch CX Quad IP settings
and timing characteristics.
HT