Black Box ServSwitch 4site II, Руководство пользователя, Страница: 27 / 88

27
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: ON-SCREEN DISPLAY (OSD)
DCP synchronize
Use this mode to keep several 4Site II devices in the same mode. Every change in settings initiated in the first 4Site II by hotkeys, hotmouse,
front-panel buttons or a controlling devices synchronizes the modes of all connected devices via DCP messages.
Use special Y-cables for the synchronization.
IMPORTANT: Each time you restart a 4Site II set to synchronize, it will send all its settings to the next connected device. This process
also takes place after activating synchronize in the OSD menu.
When starting a chain of devices, always start by first switching on the device at the end of the chain. When the device has completed
its startup phase and sent its DCP messages, switch on the next device in the chain.
Finally, switch on the first device in the chain, which synchronizes the settings of all other devices in the chain with its own settings
as it starts up.
Example of DCP synchronization
4Site II 2 and 3 are synchronized with 4Site II 1.