Black Box ServManager SW995A-R2, Руководство пользователя

Страница: 77 / 86

78
SERVMANAGERS
Appendix A: NVRAM Factory Defaults
The table below shows, for the ServManager’s saveable options, the default
values stored in nonvolatile memory (NVRAM) when the ServManager is
shipped from the factory. It also shows what commands or actions can change
these settings for the ServManager’s current operating period, as well as what
commands or actions can save changed settings to NVRAM, so that they
become the new defaults.
Option Factory-Default To Change To Save
Setting Changes
Caps/Scroll/ Num Lock ON (fixed) Select port, then press the Can’t be
Num Lock corresponding button on saved
the keyboard
Scan OFF Start/end scan with the Can’t be
ServManager’s keypad or type saved
[CTRL] S
(to turn ON) or
[CTRL] X
(to turn OFF)
Scan-Delay 5 seconds Use the ServManager’s keypad or “Save
Time type
[CTRL] Txxx [ENTER]
config.” or
( xxx = 1 to 999, time in seconds)
[CTRL] K
Power-On Scan Off Use the ServManager’s keypad “Save
(configuration menu) config.”
Keyboard Type PC Use the ServManager’s keypad “Save
(configuration menu) config.”
Mouse Type PS/2 Use the ServManager’s keypad “Save
(configuration menu) config.”
CPU Keyboard/ PC Mode 2 / PS/2 Use the ServManager’s keypad or “Save
Mouse select port, then type config.” or
(Keyboard
[CTRL] Mx
( x = 1 to 9)
[CTRL] K
Mode)
CPU Name CPU xxx Use the ServManager’s keypad or “Save
( xxx = port number) (at CPU prompt or with CPU in config.” or
text-display state) type
[CTRL] K
[CTRL] [F12]