Black Box ServManager SW995A-R2, Руководство пользователя

Страница: 13 / 86

14
SERVMANAGERS
2.4 The Rear Panel
All cable connections are made at the ServManager’s rear panel, as illustrated
(in Figure 2-2) and described below.
Panel Label Connector Description
CPU N DB25 F Connect computers to these ports with “CPU
[ N = a number
Adapter Cables.” At the ServManager end,
from 1 to either 4,
these cables have a DB25 male connector; at
8, 12, or 16,
the other ends, they have appropriate
depending on
connectors for plugging into your CPUs’ video,
which model you
keyboard, and mouse ports. These cables take
you have]
the signals that would normally pass between
the CPUs’ ports and the monitor, keyboard, and
mouse, and carry them between the CPUs’ ports
and the ServManager instead.
You can also connect “submaster” Serv type
switches to these ports with “ServSwitch-to-
ServSwitch Expansion Cables.” These cables have
DB25 male connectors at both ends and carry all
necessary signals from submaster units to master
units.
Fig. 2-2. The rear panel of a 1 to 16 ServManager (SW998).
RS-232
POWER
17VAC CT
CPU 2
CPU 9
CPU 1
CPU 5 CPU 6
CPU 13 CPU 14
CPU 4
CPU 12 CPU 11
CPU 3
CPU 7 CPU 8
CPU 15 CPU 16
CPU 10
MONITOR/KEYBOARD/MOUSE