Black Box RAS-PutIn Скачать руководство пользователя страница 79

Страница: 79 / 93

A Glossary

ACPI

A specification that enables the operating system to implement power management
and system configuration.

ATX

Advanced Technology Extended: A particular specification of a motherboard intro-
duced by Intel in 1995.

BMC

Board Management Controller: implements the IPMI based main board management
functions.

DHCP

Dynamic Host Configuration Protocol: protocol for dynamically assigning IP config-
urations in local networks.

DNS

Domain Name System: protocol used to locate computers on the Internet by their
name.

EMP

Emergency Management Port: provides remote emergency access and control of server
resources. EMP offers operating system independent, fundamental remote manage-
ment access regardless of the server’s current state or network availability.

FAQ

Frequently Asked Questions

HTTP

Hypertext Transfer Protocol: the protocol used between web browsers and servers.

HTTPS

Hyper Text Transfer Protocol Secure: secure version of HTTP.

IPMI

Intelligent Platform Management Interface

LED

Light Emitting Diode

MIB

Management Information Base: describes the structure of the management informa-
tion that can be accessed via SNMP.

PS/2

The PS/2 device interface was developed by IBM and is used by many mice and
keyboards.

SNMP

Simple Network Management Protocol: a widely used network monitoring and control
protocol.

SSL

Secure Socket Layer: encryption technology for the Internet used to provide secured
data transmissions.

SVGA

Super VGA: A refinement of Video Graphics Array (VGA) that provides increased
pitch and resolution performance.

UTP

Unshielded Twisted Pair: a cable with two conductors twisted as a pair and bundled
within the same outer PVC covering.

Содержание RAS-PutIn






























































































Результаты поиска

Содержание RAS-PutIn

Отзывы:

Black Box RAS-PutIn, Инструкция по установке и эксплуатации, Страница: 79 / 93

Результаты поиска

Содержание RAS-PutIn

Отзывы: