Black Box RAS-PutIn Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 93

Black Box RAS-PutIn Скачать руководство пользователя страница 43

5.3.

REMOTE CONSOLE

31

The maximum number of custom video resolutions is 4. Using the option ”‘Custom Modes
Handling”’ custom modes may be disabled (”‘Off”’), used additional to the standard video
resolutions or used exclusive (”‘Only”’). With the last option it is also possible to force a special
video mode for RAS-PutIn.

To change the parameters for a mode, choose the number and press ”‘Update”’. It is necessary
to provide some information so the video mode may be correcly recognized:

X Resolution

Visible number of horizontal pixels.

Y Resolution

Visible number of vertical pixels.

Horizontal Frequency (Hz)

The horizontal (line) frequency in Hz.

Vertical Frequency (Hz)

The vertical (refresh) frequency in Hz.

Total horizontal pixels

The total amount of pixels per line, including the non-visible

and blanking area.

Polarity

The polarity (positive/negative) of the synchronization signals. V means verti-

cal, H means horizontal.

Description

Here you can provide a mode name which is displayed in the Remote Console

if this custom mode is activated.

5.3.5 Remote Console Settings

The Remote Console settings allow you to customize the Remote Console window prior to its
start. Some of the parameters you might still change while the Remote Console is running while
others have to be set in the Remote Console settings.

All the settings for the Remote Console window are user specific. That means, each user can
individually customize the Remote Console for his needs. Changing the settings for one user
does not affect the settings for others.

User select box

This control will show the user ID for which the values are shown and for which changes
will take effect. You might change the settings of other users in case you have the necessary
access rights.

Transmission Encoding

The Transmission Encoding setting allows changing the image-encoding algorithm that is
used to transmit the video data to the Remote Console window. Using those settings it is
possible to optimize the speed of the remote screen depending on the number of parallel
users and the bandwidth of the connection line (Modem, ISDN, DSL, LAN, etc.).

Transmission Encoding

→

Automatic detection

The encoding and the compression level is determinded automatically from the available
bandwidth and the current content of the video image.

Transmission Encoding

→

Fix

The pre-configured settings delivers the best result because of optimized adjustment of
compression and color depth to the indicated network speed.

«
...
41
42
43
44
45
...
»

Содержание RAS-PutIn






























































































Отзывы:

Нет отзывов