![Black Box Radian Flex VWP-1182 Series Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/black-box/radian-flex-vwp-1182-series/radian-flex-vwp-1182-series_quick-start-manual-and-user-manual_2761849007.webp)
7
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
QUICK START GUIDE
STEP 5: CONNECTING A CONTROL SCREEN
Your wall controller is configured to use a control screen connected to the systems’ internal graphics device before leaving the factory.
Connect the control screen to the motherboard graphics output connector on the rear of the wall controller. A control screen is initially
required to set up the system including the operating system (Windows 10).
Control Screen
VGA or DVI
FIGURE 5.
STEP 6: POWERING THE SYSTEM
Radian Flex wall controllers are supplied with either a Redundant Power Supply Unit (RPSU) or an ATX power supply. An RPSU power
supply requires two power cables and an ATX supply requires one power cable. All power cables are supplied with your wall controller.
1. Connect power cable(s) to the wall controller then plug into a main power supply.
2. Switch on the power supply units.
RPSU Power Switch
1
2
1
2
ATX Power Switch
FIGURE 6.