![Black Box Radian Flex VWP-1182 Series Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/black-box/radian-flex-vwp-1182-series/radian-flex-vwp-1182-series_quick-start-manual-and-user-manual_2761849033.webp)
33
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: CABLING
CABLE HANDLING
Great care must be taken when connecting cables. Ensure the cable connectors are the correct type for the connector on the cards.
Push the cable connector on squarely, there is no requirement to force the connector in place. Poor cable handling could result in
damaged pins in the cable connector, this in turn could cause serious and irreversible damage to the printed circuit board. Any
damage caused this way is not covered under the warranty.
5.5 CONNECTING A CONTROL SCREEN
Radian Flex Video Wall Controller systems are configured to boot from the onboard graphics device, therefore, there is a requirement
to connect a control screen. The control screen is a standalone DVI-I monitor that is separate from the monitors on the display wall.
The control screen is configured as the Primary monitor in the Windows Display Settings and the display wall is configured as the
Secondary monitor. A control screen is initially required to set up your system, including the operating system (Windows 10) and the
Display Driver Configuration Tool.
Connect the control screen as follows:
Control Screen
VGA or DVI
FIGURE 5-6.