Black Box Power View PS570A Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 32

Black Box Power View PS570A Скачать руководство пользователя страница 7

Technical Support

Black Box understands that there are often questions when installing and/or using a new product.
FREE Technical Support is provided 24 hours a day, 7 days a week. See

Technical Support

Registration and Support for more information.

Black Box Corporation
1000 Park Drive

Tel: 724.746.5500

Web: www.blackbox.com

Lawrence, PA 15055 USA

Fax: 724.746.0746

Email: [email protected]

Quick Start Guide

The following instructions will help you quickly install and configure your Power View for use on your
network. For detailed information on each step, go to the page number listed to the right.

For your network security, Black Box strongly recommends the removal of the predefined user

account prior to attachment to your network.

1. Mount

the

Power View ..............................................................................................................6

2. Connect to the power source ......................................................................................................7
3. Connect the devices to the Power View .....................................................................................7
4. Connect

to

the Power View........................................................................................................7

5. Configure

the Power View .........................................................................................................7

Login as the predefined Administrator (admn/admn) .................................................11, 16

•
•
•
•
•
•
•
•

Configure the network settings (IP/Subnet/Gateway).................................................12, 17
Create new administrative user account............................................................................14
Configure location and tower names ................................................................................12
Configure outlet names.....................................................................................................13
Configure group names.....................................................................................................13
Configure new user account(s) with outlet and group access ...........................................14
Remove the predefined Administrator..............................................................................14

6. Connect the Power View to the network

Power View Enhanced PDU

Introduction

•

3

Installation and Operations Manual

«
...
5
6
7
8
9
...
»

Содержание Power View PS570A

































Отзывы:

Нет отзывов