Black Box Power View PS570A, Инструкция по установке и эксплуатации, Страница: 19 / 32

FTP
The FTP configuration page is used for setup and maintenance of all settings required to perform an FTP
firmware upload. See Appendix B: Uploading Firmware for more information on uploading firmware.
Setting the FTP Host IP Address:
Enter the IP address in the Host IP Address field and press Apply .
Setting the FTP username:
Enter the FTP server username in the Username field, and press Apply .
Setting the FTP password:
Enter the FTP server password in the Password field, and press Apply .
Setting the filepath:
Enter the path of the file to be uploaded in the Directory field, and press Apply .
Setting the filename for upload:
Enter the filename of the file to be uploaded in the Filename field, and press Apply .
Testing the FTP upload configuration:
This test validates that the unit is able to contact and log onto the specified FTP server, download the
firmware file and verify that the firmware file is valid for this unit.
Press Test .
Tools
The Tools section contains access to rebooting the unit, uploading new firmware as well as resetting the unit to
factory defaults. This section is available to administrative level users only.
Restart
Performing a warm boot:
Select the Restart from the Action drop-down menu and press Apply .
Note: System user/outlet/group configuration or outlet states are NOT changed or reset with this command.
Resetting to factory defaults:
See Appendix A: Resetting to Factory Defaults for more information on resetting an Power View to factory
defaults from the HTML interface.
Uploading new firmware:
See Appendix B: Uploading Firmware for more information on uploading new firmware from the HTML
interface.
Power View Enhanced PDU Operations
•
15
Installation and Operations Manual