Black Box LE2700A, Руководство пользователя, Страница: 99 / 154

724-746-5500 | blackbox.com
Page 99
Chapter 5: Management
Table 5-70 (continued). ARP Parameters screen options.
Label Description
ARP SMAC
Match Specifies whether frames will meet the action according to their sender hardware address field (SHA) set-
tings.
0: ARP frames where SHA is not equal to the SMAC address
1: ARP frames where SHA is equal to the SMAC address
Any: any value is allowed (“don't-care”).
RARP SMAC
Match Specifies whether frames will meet the action according to their target hardware address field (THA)
settings.
0: RARP frames where THA is not equal to the SMAC address
1: RARP frames where THA is equal to the SMAC address
Any: any value is allowed (“don't-care”)
IP/Ethernet
Length Specifies whether frames will meet the action according to their ARP/RARP hardware address length (HLN)
and protocol address length (PLN) settings.
0: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04) must
not match this entry.
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04) must
match this entry.
Any: any value is allowed (“don't-care”).
IP Specifies whether frames will meet the action according to their ARP/RARP hardware address space (HRD)
settings.
0: ARP/RARP frames where the HLD is equal to Ethernet (1) must not match this entry.
1: ARP/RARP frames where the HLD is equal to Ethernet (1) must match this entry.
Any: any value is allowed (“don't-care”).
Ethernet Specifies whether frames will meet the action according to their ARP/RARP protocol address space (PRO)
settings.
0: ARP/RARP frames where the PRO is equal to IP (0x800) must not match this entry.
1: ARP/RARP frames where the PRO is equal to IP (0x800) must match this entry.
Any: any value is allowed (“don't-care”).
Figure 5-91. ICMP Parameters screen.